2 May 2006 Active electrorheological damper for railway vehicle couplers
Author Affiliations +
Proceedings Volume 6042, ICMIT 2005: Control Systems and Robotics; 60424L (2006) https://doi.org/10.1117/12.664818
Event: ICMIT 2005: Merchatronics, MEMS, and Smart Materials, 2005, Chongqing, China
Abstract
This paper presents the development of an active damper for the couplers of railway vehicles using electrorheological (ER) fluid as a functional material. The purpose of design of the presented damper is to absorb the longitudinal impact from the coupler to the railway vehicle body, which is a very important design factor for the structure of the super express bullet train Sinkansen. A prototype damper is fabricated, which consists of a hydraulic cylinder, an ER bypass slit valve and a PID controller. The buffer force is developed in the ER fluid both through the bypass slit and at the piston-cylinder gap, and is controlled by adjusting the applied electric field to the ER fluid. Active control tests were carried out on the problem where the shaft reaction force is retained at a constant prescribed strength while the shaft is translating at a sinusoidally-varying velocity. A bang-bang and PID switching controller is introduced to prevent the reset-wind-up phenomenon. Results show that the coupler force of the railway vehicle can be controlled effectively by using the proposed electrorehological bypass damper.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
F. Wang, F. Wang, M. Tanaka, M. Tanaka, N. Nagao, N. Nagao, T. Hayase, T. Hayase, S. Chonan, S. Chonan, } "Active electrorheological damper for railway vehicle couplers", Proc. SPIE 6042, ICMIT 2005: Control Systems and Robotics, 60424L (2 May 2006); doi: 10.1117/12.664818; https://doi.org/10.1117/12.664818
PROCEEDINGS
6 PAGES


SHARE
Back to Top