Translator Disclaimer
9 June 2006 High power CO2 and CO lasers for industrial applications in TRINITI
Author Affiliations +
Proceedings Volume 6053, International Conference on Lasers, Applications, and Technologies 2005: High-Power Lasers and Applications; 605303 (2006) https://doi.org/10.1117/12.659679
Event: International Conference on Lasers, Applications, and Technologies 2005, 2005, St. Petersburg, Russian Federation
Abstract
The CW and HRR facilities developed at the Prospective Research Department of TRINITI and their application for various laser - matter interactions are discussed. The high power lasers are as follows: the CW self - sustained discharge CO2 lasers LT-1 (output power up to 5 kW) and PM-1 (output power up to 85 kw); the e-beam sustained discharge HRR CO2 lasers: with traditional gas mixture composition at atmospheric pressure in the discharge chamber (output power up to 100 kw) and with gas mixture of atmospheric air and 5% C02 at reduced pressure (output power up to 30 kw); the e-beam sustained discharge cryogenic CO lasers: with a subsonic gas flow CW laser (average power ~85 kw) and with supersonic flow of the active mixture quasi-CW laser (specific output energy up to 40 Jg-1 and efficiency ~14%). These laser facilities are used for studies on interaction of laser radiation with different materials, metals, rocks, etc.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
V. A. Gurashvili, K. I. Dmitriev, F. K. Kosyrev, V. N. Kuz'min, A. P. Napartovich, V. G. Naumov, and A. V. Rodin "High power CO2 and CO lasers for industrial applications in TRINITI", Proc. SPIE 6053, International Conference on Lasers, Applications, and Technologies 2005: High-Power Lasers and Applications, 605303 (9 June 2006); https://doi.org/10.1117/12.659679
PROCEEDINGS
11 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Eurolaser activities and EU113 achievements in particular
Proceedings of SPIE (February 29 1996)
Pulsed CO2 Lasers
Proceedings of SPIE (August 21 1980)
High-power lasers for industrial and ecological use
Proceedings of SPIE (December 21 1998)
Supersonic CO laser: status and prospects
Proceedings of SPIE (December 21 1998)
An Introduction To Optically Pumped Lasers
Proceedings of SPIE (August 25 1977)
CO laser welding of sheet steel with plasma-disrupting gases
Proceedings of SPIE (September 22 1996)

Back to Top