23 February 2006 Flow-induced birefringence: the hidden PSF killer in high performance injection-molded plastic optics
Author Affiliations +
Proceedings Volume 6082, Endoscopic Microscopy; 60820E (2006) https://doi.org/10.1117/12.647274
Event: SPIE BiOS, 2006, San Jose, California, United States
A 7-mm OD, NA = 1 water immersion injection-molded plastic endoscope objective has been fabricated for a laser scanning fiber confocal reflectance microscope (FCRM) system specifically designed for in vivo detection of cervical and oral pre-cancers. Injection-molded optics was selected for the ability to incorporate aspheric surfaces into the optical design and its high volume capabilities. Our goal is high performance disposable endoscope probes. This objective has been built and tested as a stand-alone optical system, a Strehl ratio greater than 0.6 has been obtained. One of the limiting factors of optical performance is believed to be flow-induced birefringence. We have investigated different configurations for birefringence visualization and believe the circular polariscope is most useful for inspection of injection-molded plastic optics. In an effort to decrease birefringence effects, two experiments were conducted. They included: (1) annealing of the optics after fabrication and (2) modifying the injection molding prameters (packing pressures, injection rates, and hold time). While the second technique showed improvement, the annealing process could not improve quality without physically warping the lenses. Therefore, to effectively reduce flow-induced birefringence, molding conditions have to be carefully selected. These parameters are strongly connected to the physical part geometry. Both optical design and fabrication technology have to be considered together to deliver low birefringence while maintaining the required manufacturing tolerances. In this paper we present some of our current results that illustrate how flow-induced birefringence can degrade high performance injection-molded plastic optical systems.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Matthew D. Chidley, Matthew D. Chidley, Tomasz Tkaczyk, Tomasz Tkaczyk, Robert Kester, Robert Kester, Michael R. Descour, Michael R. Descour, } "Flow-induced birefringence: the hidden PSF killer in high performance injection-molded plastic optics", Proc. SPIE 6082, Endoscopic Microscopy, 60820E (23 February 2006); doi: 10.1117/12.647274; https://doi.org/10.1117/12.647274


High-accuracy OTF standard telescope
Proceedings of SPIE (August 04 1998)
Diamond turning of silicon optics
Proceedings of SPIE (August 18 1996)
Large-objective optical system for TV night observation
Proceedings of SPIE (April 14 1993)
High aperture and wide field of view optical systems ...
Proceedings of SPIE (August 22 1996)

Back to Top