Paper
15 February 2006 High-power high-brightness 3 W tapered lasers tuneable from 940 nm to 980 nm
Jürgen Weber, Márc T. Kelemen, Stefan Moritz, Michael Mikulla
Author Affiliations +
Abstract
A variety of applications such as spectroscopy or tunable frequency doubling of diode lasers for blue-green outputs necessitate diffraction-limited tunable narrow linewidths and high output powers in the multiwatt regime. For these applications, tapered devices based on a tapered amplifier gain-guided design are used in an external cavity set up. So far commercially available output powers are in the range of 1 W, limited by the mounting technology so far. The tuneability and the influence of different packagings on output performance was investigated. Used in littrow-configuration tapered diode lasers on optimized heatsinks show output powers of more than 3 W and an excellent spectral and spatial quality. The beam-quality parameter remains well below M2 < 1.5 for output powers up to 3 W. A tuning range of more than 40 nm could be achieved.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jürgen Weber, Márc T. Kelemen, Stefan Moritz, and Michael Mikulla "High-power high-brightness 3 W tapered lasers tuneable from 940 nm to 980 nm", Proc. SPIE 6104, High-Power Diode Laser Technology and Applications IV, 61040Y (15 February 2006); https://doi.org/10.1117/12.644587
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical amplifiers

Semiconductor lasers

Heatsinks

High power lasers

Monochromatic aberrations

Tunable lasers

Diffraction

RELATED CONTENT


Back to Top