23 January 2006 Requirements for MEMS mirrors for adaptive optics in the eye
Author Affiliations +
MEMS is one of several emerging technologies for fabricating wavefront correctors for use in adaptive optics systems. Each technology has its own advantages and disadvantages. In order to compare devices, it is useful to define a task and make a comparison based upon the effectiveness of each device for this task. Such an approach implies, of course, that device A might be better suited for task X whereas device B is better suited for task Y. In adaptive optics, this situation is already known: deformable mirrors that are relatively effective at compensating for atmospheric turbulence are not necessarily the mirrors that one would choose for correction of the aberrations of the eye. This is essentially because the statistical modal distribution of the aberrated wavefronts in each case are different. In this talk, we shall present a method for systematically evaluating the effectiveness of different mirror (or transmissive) technologies in adaptive optics in the eye. It uses a model for the aberrations of the eye (such as that developed by Thibos et al1) and a least squares fitting procedure. Results will be presented for at least 4 mirrors, including a 12x12 MEMS device. The key point is that it is the effectiveness of each actuator signal that is important, not the raw number of actuators.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Elizabeth Daly, Elizabeth Daly, Eugenie Dalimier, Eugenie Dalimier, Chris Dainty, Chris Dainty, } "Requirements for MEMS mirrors for adaptive optics in the eye", Proc. SPIE 6113, MEMS/MOEMS Components and Their Applications III, 611309 (23 January 2006); doi: 10.1117/12.653409; https://doi.org/10.1117/12.653409

Back to Top