Translator Disclaimer
23 January 2006 Micro-actuator with extended analog deflection at low drive voltage
Author Affiliations +
Abstract
Electrostatic Micro-actuators are being increasingly used for a wide variety of applications such as spatial light modulators, scanning mirrors, optical cross connects, micro-valves, and others. Usually the electrical forces operate in one direction and are balanced by a mechanical spring. The resulting deflection is then either defined by a mechanical stop, or it is only a meta-stable equilibrium position: at an additional external force or deflection it will snap to a different position, frequently again defined by a mechanical stop. This issue is well known and is often called 'pull-in'. In the often used parallel-plate capacitor actuator, the instability already begins at a deflection of only on third of the original capacitor plate separation. For safety reasons and due to the steep response-curve one can only use an even smaller fraction of the mechanically possible movement. This means, that the gap below the actuator has to be designed very much larger than the required maximum deflection. To get the pre-described force and deflection, a much higher voltage is needed than for potential smaller gap widths. The useable range of deflection for many types of micro-actuators can be extended without the penalty of large drive voltage or low shock resistivity, by employing springs with steeper-than-linear restoring force. Alternatively, the voltage needed for a given range of deflection may be reduced. This paper shows the benefits and how to design and dimension these types of springs.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peter Dürr, Andreas Gehner, Jan Schmidt, Detlef Kunze, Michael Wagner, and Hubert Lakner "Micro-actuator with extended analog deflection at low drive voltage", Proc. SPIE 6114, MOEMS Display, Imaging, and Miniaturized Microsystems IV, 61140I (23 January 2006); doi: 10.1117/12.645826; https://doi.org/10.1117/12.645826
PROCEEDINGS
10 PAGES


SHARE
Advertisement
Advertisement
Back to Top