1 March 2006 Experimental evidence of modal properties using directional couplers in silicon-on-insulator
Author Affiliations +
Abstract
The single-mode optical rib waveguide is a fundamental building block for many, more complex optical circuits. Recent modelling has been provided in the literature that has investigated polarisation and modal properties of small, deeplyetched rib waveguides in SOI. In this paper we present work that has utilised a total of 160 directional couplers fabricated from rib waveguides of various waveguides dimensions, to investigate the validity of the published modelling. In particular 5 waveguide designs have been used to fabricate directional couplers of differing lengths, to map out the variation in coupling of power within the directional couplers. For a singlemode device, a characteristic sinusoidal variation is expected, but the sinusoid will be corrupted in the presence of higher order modes, each of which will have a different coupling length as compared to the fundamental mode. We have observed experimental results that are consistent with the modelling for each of the 5 waveguide designs, and hence we present experimental evidence of higher-order mode behaviour that is consistent with modelling.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Graham T. Reed, Graham T. Reed, William R. Headley, William R. Headley, Seong P. Chan, Seong P. Chan, Goran Z. Masanovic, Goran Z. Masanovic, Simon Howe, Simon Howe, David Thomson, David Thomson, } "Experimental evidence of modal properties using directional couplers in silicon-on-insulator", Proc. SPIE 6125, Silicon Photonics, 61250N (1 March 2006); doi: 10.1117/12.652210; https://doi.org/10.1117/12.652210
PROCEEDINGS
11 PAGES


SHARE
Back to Top