Paper
22 February 2006 High-power broad-area 808 nm DFB lasers for pumping solid state lasers
A. Klehr, F. Bugge, G. Erbert, J. Fricke, A. Knauer, P. Ressel, H. Wenzel, G. Tränkle
Author Affiliations +
Abstract
Experimental investigations on high-power broad area (BA) distributed-feedback (DFB) lasers emitting in the wavelength range around 808 nm are presented. An output power of 4.7 W at 20 °C with a differential quantum efficiency of 1.06 W/A is achieved with BA-DFB lasers having a stripe width of 100 μm and a cavity length of 3000 μm. The measured lateral far field angle is about 10° at a power of 3 W. The vertical far field angle is near 29°. The emission has a narrow spectral width of 0.06 nm (FWHM) at 3 W and 0.10 nm at 4 W. From mappings of the optical spectra a wavelength variation with output power of Δλ/ΔP = 0.44 nm/W and with injection current of 0.4 pm/mA can be deduced. At a temperature of 50°C a maximum output power of 2 W is measured. From the measurements a temperature coefficient of Δλ/ΔT = 0.075 nm/K is determined.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Klehr, F. Bugge, G. Erbert, J. Fricke, A. Knauer, P. Ressel, H. Wenzel, and G. Tränkle "High-power broad-area 808 nm DFB lasers for pumping solid state lasers", Proc. SPIE 6133, Novel In-Plane Semiconductor Lasers V, 61330F (22 February 2006); https://doi.org/10.1117/12.644568
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
High power lasers

Semiconductor lasers

Fiber Bragg gratings

Temperature metrology

Waveguides

Solid state lasers

Cladding

Back to Top