10 March 2006 Measurement of MTFs for monochrome and color liquid crystal displays
Author Affiliations +
Abstract
We measured modulation transfer functions (MTFs) of liquid crystal displays (LCDs) by rectangular waveform analysis. This method is taking a picture of the bar pattern on the monitor surface with a digital camera, and analyzing the picture with a personal computer. The monitors used are the monochrome LCDs of 1M(about 1 million of the number of pixels), 2M, 3M, and 5M, and the color LCDs of 1M, 2M, 3M. The display of 2M used IPS system and VA system. 3M and 5M of the monochrome LCDs were examined when there was a protective filter or not. Two or three displays are used for each system. In both the monochrome and the color LCDs, MTFs became high as the matrix size increased. In the monochrome LCDs, MTF in horizontal direction was higher than MTF in vertical direction. And there was no difference when a protective filter was used or not. MTFs of the color LCDs had little difference in horizontal direction and the vertical direction. MTFs of the LCDs are influenced on the form and the fill factor of a pixel, and composition of sub-pixels.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Akiko Horii, Akiko Horii, Miho Takamura, Miho Takamura, Katsuhiro Ichikawa, Katsuhiro Ichikawa, Yoshie Kodera, Yoshie Kodera, Mitsuru Ikeda, Mitsuru Ikeda, Takeo Ishigaki, Takeo Ishigaki, } "Measurement of MTFs for monochrome and color liquid crystal displays", Proc. SPIE 6141, Medical Imaging 2006: Visualization, Image-Guided Procedures, and Display, 61411P (10 March 2006); doi: 10.1117/12.651634; https://doi.org/10.1117/12.651634
PROCEEDINGS
8 PAGES


SHARE
Back to Top