Translator Disclaimer
9 June 2006 Effects of residual stresses on mechanical properties of segmented micro deformable mirrors
Author Affiliations +
Proceedings Volume 6149, 2nd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 614919 (2006) https://doi.org/10.1117/12.674233
Event: 2nd International Symposium on Advanced Optical Manufacturing and Testing Technologies, 2005, Xian, China
Abstract
Effects of residual stresses on mechanical properties such as voltage vs. displacement response, pull-in voltage and structural resonant frequency of segmented micro deformable mirrors were investigated with both finite element method (FEM) and analytical method. A simplified model was adopted to study the structural spring constant on the existence of residual stress and two methods for imposing residual stress on structures were utilized for the purpose. Both results of analytical method and FEM show that larger structural spring constant can be obtained by introducing tensile residual stress. Consequently, mechanical properties relevant to spring constant are also greatly affected. The higher the tensile residual stress is, the stronger the structural stiffness will be. That means in order to induce the same structural displacement of mirror plate as stress-free state, higher voltage is demanded. Meanwhile, with higher tensile residual stress, larger pull-in voltage and greater structural resonant frequency are achieved. For the situation of compressive residual stress, totally the opposite influences can be observed. In conclusion, residual stress (no matter tensile or compressive) can greatly affect the mechanical properties of segmented micro deformable mirrors. Accurate control of it is needed for optimizing the structural design and improving the performance of devices.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yiting Yu, Weizheng Yuan, and Dayong Qiao "Effects of residual stresses on mechanical properties of segmented micro deformable mirrors", Proc. SPIE 6149, 2nd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 614919 (9 June 2006); https://doi.org/10.1117/12.674233
PROCEEDINGS
6 PAGES


SHARE
Advertisement
Advertisement
Back to Top