19 May 2006 Design and parameter tuning of high precision diode laser temperature controller
Author Affiliations +
The emitting frequency of a diode laser is very sensitive to operating temperature. In the design of the temperature controller of a diode laser, it is important that the control parameters of PID should be tuned to match with the characteristic of the controlled target in order to get an optimal correcting effect. In the experiments, two methods of determining PID parameters, Ziegler-Nichols and critical level of proportion methods, were used, and the approximate same results were obtained. The measured result shows the controlling precision of the temperature controller is ±2m°C after PID parameters are tuned.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Li Sun, Li Sun, Jian Bao, Jian Bao, "Design and parameter tuning of high precision diode laser temperature controller", Proc. SPIE 6150, 2nd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment, 615029 (19 May 2006); doi: 10.1117/12.676836; https://doi.org/10.1117/12.676836


Simplified solar calorimetry for complex glazing systems
Proceedings of SPIE (October 10 1999)
SIN tunnel junction as a temperature sensor
Proceedings of SPIE (April 06 1999)
High-precision temperature controller
Proceedings of SPIE (June 25 1995)

Back to Top