19 May 2006 Design and certification of a null corrector to test hyperboloid convex mirror
Author Affiliations +
Several methods to test high accuracy hyperboloid convex surfaces were introduced. A kind of arrangement was chosen to test a surface with a diameter of 92mm, radius of 280.25mm, and conic k -3.115. A null corrector for testing was developed, which is made up of three thin lenses with designed residual wavefront aberration less than 0.008λ(RMS). The variation of wavefront aberration of the testing system for manufacture, test, assembly and adjustment errors of the null corrector was analyzed. Finally the test result by the null corrector was shown.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peiji Guo, Jingchi Yu, "Design and certification of a null corrector to test hyperboloid convex mirror", Proc. SPIE 6150, 2nd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment, 61502N (19 May 2006); doi: 10.1117/12.676907; https://doi.org/10.1117/12.676907


Holographic radius test plates
Proceedings of SPIE (September 07 2013)
Relating axial motion of optical elements to focal shift
Proceedings of SPIE (August 20 2010)
Robust synthesis of dispersive mirrors
Proceedings of SPIE (October 04 2011)
Designing Lenses To Exploit Available Aspheric Technology
Proceedings of SPIE (September 16 1980)
Null lens design for small aspherical surface with large NA
Proceedings of SPIE (October 06 2000)

Back to Top