24 March 2006 Printability study with polarisation capable AIMSTM fab 193i to study polarisation effects
Author Affiliations +
Abstract
Immersion lithography offers the semiconductor industry an opportunity to extend the current ArF processes to smaller nodes before switching to a shorter wavelength. The transition to immersion will require increased attention to the photomask along with new effects influencing the aerial image formation as the numerical apertures (NA) of scanners move up to at least 0.93 and beyond. Feature sizes on the photomask become comparable to, or even smaller than the wavelength and hence act more like wire grid polarisers which lead to polarisation effects. As of today AIMSTM fab tools are in operation worldwide, with the novel AIMSTM fab 193i offering a maximum NA of 0.93 and is the latest aerial image measurement system for ArF-lithography emulation down to the 65nm node. Common adjustments include numerical aperture, illumination type and partial illumination coherence to match the conditions in 193nm scanners. In addition to unpolarised illumination, the AIMSTM fab 193i allows the user to select linear x and y polarised light for different settings and types, e.g. off-axis annular, quadrupole or dipole illumination. In this paper the polarisation effects of different photomask features are explored by comparing measurement results using linear polarised illumination parallel and perpendicular to line and space patterns and non-polarised illumination. A new scanner mode will be presented for the investigation of contrast loss due to polarisation effects from imaging.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Axel Zibold, Axel Zibold, Ulrich Stroessner, Ulrich Stroessner, Andrew Ridley, Andrew Ridley, Thomas Scherübl, Thomas Scherübl, Norbert Rosenkranz, Norbert Rosenkranz, Wolfgang Harnisch, Wolfgang Harnisch, Eric Poortinga, Eric Poortinga, Rainer Schmid, Rainer Schmid, Joost Bekaert, Joost Bekaert, Vicky Philipsen, Vicky Philipsen, Lieve Van Look, Lieve Van Look, Peter Leunissen, Peter Leunissen, "Printability study with polarisation capable AIMSTM fab 193i to study polarisation effects", Proc. SPIE 6152, Metrology, Inspection, and Process Control for Microlithography XX, 61522F (24 March 2006); doi: 10.1117/12.656235; https://doi.org/10.1117/12.656235
PROCEEDINGS
8 PAGES


SHARE
Back to Top