11 April 2006 Two-layer anti-reflection strategies for implant applications
Author Affiliations +
Abstract
A two-layer bottom anti-reflective coating (BARC) concept in which a layer that develops slowly is coated on top of a bottom layer that develops more rapidly was demonstrated. Development rate control was achieved by selection of crosslinker amount and BARC curing conditions. A single-layer BARC was compared with the two-layer BARC concept. The single-layer BARC does not clear out of 200-nm deep vias. When the slower developing single-layer BARC was coated on top of the faster developing layer, the vias were cleared. Lithographic evaluation of the two-layer BARC concept shows the same resolution advantages as the single-layer system. Planarization properties of a two-layer BARC system are better than for a single-layer system, when comparing the same total nominal thicknesses.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Douglas J. Guerrero, Douglas J. Guerrero, Tamara Smith, Tamara Smith, Masakazu Kato, Masakazu Kato, Shigeo Kimura, Shigeo Kimura, Tomoyuki Enomoto, Tomoyuki Enomoto, } "Two-layer anti-reflection strategies for implant applications", Proc. SPIE 6153, Advances in Resist Technology and Processing XXIII, 61530O (11 April 2006); doi: 10.1117/12.656528; https://doi.org/10.1117/12.656528
PROCEEDINGS
8 PAGES


SHARE
Back to Top