29 March 2006 Post-etch LER performance of novel surface conditioner solutions
Author Affiliations +
Abstract
As line edge roughness (LER) becomes one of the critical lithography challenges, there is a growing interest in applying surface conditioner solutions during post-develop process to reduce LER. In this paper, we evaluated the combined effect of surface conditioners and hard bake on the post-develop LER. There is about 1nm LER reduction, as well as a significant improvement on the common process window for LER. No negative impact on CD process window was observed with the new process. In addition, preliminary etch data showed that surface conditioners have no negative impact on pattern transfer through etch.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
P. Zhang, P. Zhang, M. Jaramillo, M. Jaramillo, S. Cassel, S. Cassel, T. Wallow, T. Wallow, A. Acheta, A. Acheta, A. R. Pawloski, A. R. Pawloski, S. Bell, S. Bell, R. H. Kim, R. H. Kim, } "Post-etch LER performance of novel surface conditioner solutions", Proc. SPIE 6153, Advances in Resist Technology and Processing XXIII, 61533Y (29 March 2006); doi: 10.1117/12.656648; https://doi.org/10.1117/12.656648
PROCEEDINGS
5 PAGES


SHARE
Back to Top