Paper
21 March 2006 Comparison of immersion lithography from projection and interferometric exposure tools
Author Affiliations +
Abstract
In this work, an Amphibian XIS interference mini-stepper is used to synthesize the aerial image of 90nm dense line/space pattern produced by an ASML TWINSCAN /1150i immersion scanner, using a second single beam exposure to demodulate the first 100% modulated interference exposure. The experimental data from the scanner and the demodulated interference exposure have near identical exposure latitude and LER (line edge roughness). Whilst the synthetic defocus data also shows a good degree of correlation with the projection data, the level of agreement is a little lower. Overall agreement is good, suggesting that the use of the synthetic aerial image approach is a useful screening tool for photoresists prior to testing on full field scanner system. This technique can be used to predict the performance of future projection tools, allowing cycles of learning in resist development prior to scanner availability.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Stewart A. Robertson, Joanne M. Leonard, Bruce W. Smith, and Anatoly Bourov "Comparison of immersion lithography from projection and interferometric exposure tools", Proc. SPIE 6154, Optical Microlithography XIX, 61544N (21 March 2006); https://doi.org/10.1117/12.658036
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Scanners

Modulation

Line edge roughness

Interferometers

Interferometry

Photomasks

Immersion lithography

Back to Top