Paper
22 March 2006 Manufacturing and actuation characterization of ionic polymer metal composites with silver as electrodes
Author Affiliations +
Abstract
Manufacturing and characterization of ionic polymer metal composites (IPMCs) with silver as electrodes have been investigated. Tollen's reagent that contains ion Ag(NH3)2+ was used as a raw material for silver deposition on the surfaces of the polymer membrane Nafion"R". Two types of inner solvents, namely common water based electrolyte solution (LiOH 1N) and ionic liquid were used and investigated. Compared to IPMCs with platinum electrodes, silver-plated IPMCs with water electrolyte showed higher conductivity. The actuation response of silver-plated IPMCs with the water based electrolyte was faster than that of platinum IPMCs. However, the silver electrode was too brittle and severely damaged during the solvent exchange process from water to ionic liquid, resulted in high resistance and hence very low actuation behavior.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Surya D. Pandita, Hyoung Tae Lim D.D.S., Youngtai Yoo, and Hoon Cheol Park "Manufacturing and actuation characterization of ionic polymer metal composites with silver as electrodes", Proc. SPIE 6168, Smart Structures and Materials 2006: Electroactive Polymer Actuators and Devices (EAPAD), 616822 (22 March 2006); https://doi.org/10.1117/12.657862
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silver

Electrodes

Liquids

Platinum

Metals

Polymers

Resistance

Back to Top