MEMS generator of power harvesting by vibrations using piezoelectric cantilever beam with digitate electrode

Bor-Shun Lee; Jyun-Jhang He; Wen-Jong Wu; Wen-Pin Shih

doi:10.1117/12.658584

15 March 2006 MEMS generator of power harvesting by vibrations using piezoelectric cantilever beam with digitate electrode

Bor-Shun Lee, Jyun-Jhang He, Wen-Jong Wu, Wen-Pin Shih

Author Affiliations +

Proceedings Volume 6169, Smart Structures and Materials 2006: Damping and Isolation; 61690B (2006) https://doi.org/10.1117/12.658584
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2006, San Diego, California, United States

Abstract

Over the years, there has been a growing interest in the field of power harvesting technologies for low-power electronic devices, such as wireless sensor networks and biomedical sensor applications. Of all possible energy sources, the mechanical vibrations have been considered a potential choice for power harvesting in a wide variety of applications. This paper presents the development of a piezoelectric MEMS generator which has the ability to scavenge mechanical energy of ambient vibrations from their surroundings and transform it into electrical energy that can be used in energy storage applications. The piezoelectric MEMS generator comprises a beam structure based on the silicon wafer, and the digitate electrode placed in between the lead zirconate titanate (Pb(Zr,Ti) O₃, PZT) material and the beam structure, to transform mechanical strain energy into electrical charge with using the d₃₃ mode of PZT. An optional proof mass can be built at the tip of the beam, to adjust the structure resonant frequency of the piezoelectric MEMS generator, for most adaptable frequency matching to the ambient vibration of its surroundings. A theoretical model is also presented to investigate the relations between the charge generation ability and the design parameters of the piezoelectric MEMS generator. To improve the piezoelectric MEMS generator fabrication process, a self-made PZT deposition chamber which could deposit PZT thin film up to tens micron in minutes was used to deposit the piezoelectric layer on the beam structure of the piezoelectric MEMS generator.

Citation Download Citation

Bor-Shun Lee, Jyun-Jhang He, Wen-Jong Wu, and Wen-Pin Shih "MEMS generator of power harvesting by vibrations using piezoelectric cantilever beam with digitate electrode", Proc. SPIE 6169, Smart Structures and Materials 2006: Damping and Isolation, 61690B (15 March 2006); https://doi.org/10.1117/12.658584

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available