Nondestructive inspection of a lead rubber bearing using ultrasonic wave

Yutaka Yoneda; Akira Mita

doi:10.1117/12.658943

5 April 2006 Nondestructive inspection of a lead rubber bearing using ultrasonic wave

Yutaka Yoneda, Akira Mita

Proceedings Volume 6174, Smart Structures and Materials 2006: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems; 61740J (2006) https://doi.org/10.1117/12.658943
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2006, San Diego, California, United States

Abstract

At first, two kinds of miniature LRB models are prepared, one model has normal lead damper, the other has abnormal one. And they are scanned by ultrasonic wave using ultrasonic transducers and AE sensors. The output signals obtained through the inside are different from each other. Infinite route is assumed as ultrasonic wave propagation line. But, in this examination, we found that the main route is some layers of steel. Then, the tomography construction is adopted to detect the condition of lead plug in one layer of steel plate. The full acoustic wave solution in an arbitrary two-dimensional object is computed, which is subjected to specified acoustic sources and material parameters. This algorithm is basically a finite difference method. As a result, it is successful to know about ultrasonic wave propagation in one layer of steel and consistent correlation with the output signal. The feature vectors are created by calculation of second power average of the amplitude, and these vectors are used as the data for pattern recognition on the basis of these information. The accuracy of pattern recognition is significantly enhanced in consistent correlation with the condition of lead plug. In this study, active damage detection method to evaluate the status of LRB was proposed. It is possible to evaluate internal states of LRB by using ultrasonic wave.

Citation Download Citation

Yutaka Yoneda and Akira Mita "Nondestructive inspection of a lead rubber bearing using ultrasonic wave", Proc. SPIE 6174, Smart Structures and Materials 2006: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, 61740J (5 April 2006); https://doi.org/10.1117/12.658943

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available