11 April 2006 Structural damage detection and assessment using acceleration feedback
Author Affiliations +
This paper presents a method for structural health monitoring using acceleration measurements. In a previous study a method for detecting, locating, and quantifying structural damages has been developed by directly using the time domain structural vibration measurements. However, only displacement and velocity measurements were used in that study. In this paper, acceleration measurements are used as feedback. Because it is more practical to measure acceleration using accelerometers, it is preferable to use acceleration rather than displacement and velocity measurements for the purpose of structural damage detection and assessment. However, using acceleration measurements is more difficult since the effects of different damages can not be decoupled completely as in the cases of displacement and velocity measurements. One approach of circumventing this difficulty is presented and it involves increasing the order of time derivatives of the linear system. The effectiveness of the proposed method using acceleration feedback is evaluated with illustrative examples of a three and an eight-story model. Results obtained are found to be comparable with results from simulations using displacement measurements as feedback.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nebojsa Sebastijanovic, Nebojsa Sebastijanovic, Tianwei Ma, Tianwei Ma, Henry T. Y. Yang, Henry T. Y. Yang, "Structural damage detection and assessment using acceleration feedback", Proc. SPIE 6174, Smart Structures and Materials 2006: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, 61742L (11 April 2006); doi: 10.1117/12.659121; https://doi.org/10.1117/12.659121

Back to Top