Translator Disclaimer
18 April 2006 Optimization of erbium-ytterbium fibre laser with simple double-clad structure
Author Affiliations +
Proceedings Volume 6180, Photonics, Devices, and Systems III; 618010 (2006)
Event: Photonics, Devices, and Systems III, 2005, Prague, Czech Republic
The paper deals with optimization of fibre laser based on experimental erbium- and ytterbium-doped fibre with simple double-clad structure pumped by multimode laser diode in 980 nm band. Fibre preparation and its characteristics are described. Different resonator configurations were investigated for the laser optimization, including high reflectivity fibre loop mirror. Experimental optimization ofthe pump wavelength, fibre length and output coupler ratio were carried out. The results obtained under the cladding pumping are compared with those measured with a fibre ring laser containing the same fibre single-mode pumped at 1060 nm.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pavel Peterka, Ivan Kašík, Václav Kubeček, Vlastimil Matějec, Miloš Hayer, Pavel Honzátko, Alena Zavadilova, and Pavel Dvořáček "Optimization of erbium-ytterbium fibre laser with simple double-clad structure", Proc. SPIE 6180, Photonics, Devices, and Systems III, 618010 (18 April 2006);


All fiber nonreciprocal ring laser
Proceedings of SPIE (December 18 2012)
Dual line CW fiber laser module based on FBG combination
Proceedings of SPIE (February 26 2018)
Study on the characteristics of an Er Yb co doped...
Proceedings of SPIE (August 28 2009)
Output characteristics of high-power double-clad fiber laser
Proceedings of SPIE (September 05 2002)
Efficient fiber-laser pumped Ho:LuLiF4 laser
Proceedings of SPIE (May 19 2010)

Back to Top