14 April 2006 Stabilization of semiconductor lasers by fiber Bragg gratings for absolute laser interferometry
Author Affiliations +
Abstract
We present application of methods for calculation of parameters of apodized fiber Bragg gratings (FBG). We used combination of methods based on layered dielectric media (LDM) and the transfer matrix. On the contrary to the other calculation techniques the LDM method is based on sequence of thin films of dielectric media assembled in the direction of wave propagation. The combination of the LDM method and the transfer matrix method can be used to the calculation of arbitrary fiber gratings with high precision. For this designed apodized FBG we calculated the phase mask to manufacture by interference patterns. The phase mask and the fixation bottom of the fiber were made by e-beam lithography to achieve highly precise stability during manufacturing. We present the set-up of this system for writing FBG by pulsed UV laser with wavelength 266nm. Measurement of commercially available FBG with comparison to our calculated FBG is presented. We put together the absolute fiber laser interferometer where Vertical Cavity Surface Emitting Laser (VCSEL) is used to easy employment of FBG to stabilization and control the tuning range of the wavelength. The first set-up is presented.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bretislav Mikel, Bretislav Mikel, Radek Helan, Radek Helan, Ondrej Cip, Ondrej Cip, } "Stabilization of semiconductor lasers by fiber Bragg gratings for absolute laser interferometry", Proc. SPIE 6184, Semiconductor Lasers and Laser Dynamics II, 61841Y (14 April 2006); doi: 10.1117/12.662948; https://doi.org/10.1117/12.662948
PROCEEDINGS
8 PAGES


SHARE
Back to Top