Parallel optical interconnect between surface-mounted devices on FR4 printed wiring board using embedded waveguides and passive optical alignments

Mikko Karppinen; Teemu Alajoki; Antti Tanskanen; Kari Kataja; Jukka-Tapani Mäkinen; Pentti Karioja; Marika Immonen; Jorma Kivilahti

doi:10.1117/12.664386

21 April 2006 Parallel optical interconnect between surface-mounted devices on FR4 printed wiring board using embedded waveguides and passive optical alignments

Mikko Karppinen, Teemu Alajoki, Antti Tanskanen, Kari Kataja, Jukka-Tapani Mäkinen, Pentti Karioja, Marika Immonen, Jorma Kivilahti

Author Affiliations +

Proceedings Volume 6185, Micro-Optics, VCSELs, and Photonic Interconnects II: Fabrication, Packaging, and Integration; 61850O (2006) https://doi.org/10.1117/12.664386
Event: SPIE Photonics Europe, 2006, Strasbourg, France

Abstract

Technologies to design and fabricate high-bit-rate chip-to-chip optical interconnects on printed wiring boards (PWB) are studied. The aim is to interconnect surface-mounted component packages or modules using board-embedded optical waveguides. In order to demonstrate the developed technologies, a parallel optical interconnect was integrated on a standard FR4-based PWB. It consists of 4-channel BGA-mounted transmitter and receiver modules as well as of four polymer multimode waveguides fabricated on top of the PWB using lithographic patterning. The transmitters and receivers built on low-temperature co-fired ceramic (LTCC) substrates include flip-chip mounted VCSEL or photodiode array and 4x10 Gb/s driver or receiver IC. Two microlens arrays and a surface-mounted micro-mirror enable optical coupling between the optoelectronic device and the waveguide array. The optical alignment is based on the marks and structures fabricated in both the LTCC and optical waveguide processes. The structures were optimized and studied by the use of optical tolerance analyses based on ray tracing. The characterized optical alignment tolerances are in the limits of the accuracy of the surface-mount technology.

Citation Download Citation

Mikko Karppinen, Teemu Alajoki, Antti Tanskanen, Kari Kataja, Jukka-Tapani Mäkinen, Pentti Karioja, Marika Immonen, and Jorma Kivilahti "Parallel optical interconnect between surface-mounted devices on FR4 printed wiring board using embedded waveguides and passive optical alignments", Proc. SPIE 6185, Micro-Optics, VCSELs, and Photonic Interconnects II: Fabrication, Packaging, and Integration, 61850O (21 April 2006); https://doi.org/10.1117/12.664386

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available