21 April 2006 Tunable InP/air MOEMS filter with record breaking selectivity
Author Affiliations +
Proceedings Volume 6186, MEMS, MOEMS, and Micromachining II; 61860I (2006); doi: 10.1117/12.662815
Event: SPIE Photonics Europe, 2006, Strasbourg, France
Abstract
We describe the design and fabrication of novel Fabry-Perot tunable filters based on a deformable structure composed of surface micromachined indium phosphide (InP) / Air Distributed Bragg Reflectors (DBRs). As compared to conventional designs, superior spectral selectivity has been achieved by displacing the resonant cavity into the high index material (InP) rather than in air. This configuration is expected to reduce significantly the lateral losses of the cavity. The filters feature also a novel doping structure for bi-directional electrostatic actuation. We present simulations and experimental results that demonstrate the effectiveness of this high index cavity concept for improving the selectivity of small dimension tunable MOEMS filters. The devices are fabricated using a multiple InP-air-gap MOEMS technology based on the sacrificial etching of an InP / InGaAs stack A spectral linewidth better than 0.15 nm over a tuning range of 40 nm is experimentally demonstrated. Design improvements for doubling the tuning range are also proposed.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michel Garrigues, Jérôme Danglot, Jean-Louis Leclercq, "Tunable InP/air MOEMS filter with record breaking selectivity", Proc. SPIE 6186, MEMS, MOEMS, and Micromachining II, 61860I (21 April 2006); doi: 10.1117/12.662815; https://doi.org/10.1117/12.662815
PROCEEDINGS
10 PAGES


SHARE
KEYWORDS
Tunable filters

Microopto electromechanical systems

Reflectors

Mirrors

Optical filters

Reflectivity

Resonators

Back to Top