17 April 2006 Novel concepts for high-power fibre lasers
Author Affiliations +
Abstract
High power operation of an ytterbium-doped multi-core ribbon fiber laser and a cladding pumped ytterbium-doped helical core fiber laser is reported. 320W laser output at 1045nm was demonstrated with a 10-core ytterbium doped ribbon fibre. Efficient single-mode operation of a cladding-pumped ytterbium-doped helical-core fiber laser with a 30 μm diameter core and a numerical aperture of 0.087 have also been demonstrated. The laser yielded 60.4 W of output at 1043 nm in a beam with M2 1.4 for 92.6 W launched pump power from a diode stack at 976 nm. Further more, the recently progress of a cladding-pumped ytterbium-doped helical-core superfluorescent fiber source is also reported. The highly efficient operation of the helical core fiber ASE source yielded 107W of amplified spontaneous emission output spanning the wavelength range from 1030-1160nm with a bandwidth (FWHM) of 37nm.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pu Wang, Pu Wang, W. A. Clarkson, W. A. Clarkson, D. Y. Shen, D. Y. Shen, L. J. Copper, L. J. Copper, J. K. Sahu, J. K. Sahu, } "Novel concepts for high-power fibre lasers", Proc. SPIE 6190, Solid State Lasers and Amplifiers II, 61900I (17 April 2006); doi: 10.1117/12.668261; https://doi.org/10.1117/12.668261
PROCEEDINGS
12 PAGES


SHARE
RELATED CONTENT

Single mode 1018nm fiber laser with power of 230W
Proceedings of SPIE (March 10 2016)
85 µm core rod fiber amplifier delivering 350 W/m
Proceedings of SPIE (March 08 2016)
Superfluorescence three-level neodymium-doped fiber source
Proceedings of SPIE (October 20 2004)
High-power fiber lasers: new developments
Proceedings of SPIE (July 02 2003)
Diode-bar side-pumping of double-clad fibers
Proceedings of SPIE (February 19 2007)

Back to Top