Long distance high performance remote strain sensing with a fiber Fabry-Perot by radio-frequency laser modulation

Jong H. Chow; Ian C. M. Littler; David E. McClelland; Malcolm B. Gray

doi:10.1117/12.664282

10 May 2006 Long distance high performance remote strain sensing with a fiber Fabry-Perot by radio-frequency laser modulation

Jong H. Chow, Ian C. M. Littler, David E. McClelland, Malcolm B. Gray

Author Affiliations +

Proceedings Volume 6201, Sensors, and Command, Control, Communications, and Intelligence (C3I) Technologies for Homeland Security and Homeland Defense V; 620121 (2006) https://doi.org/10.1117/12.664282
Event: Defense and Security Symposium, 2006, Orlando (Kissimmee), Florida, United States

Abstract

We use a radio-frequency (RF) diode laser modulation technique to interrogate a fiber Fabry-Perot (FFP), and demonstrate unprecedented remote sensitivity performance for measuring fiber dynamic strain. We present results for its experimental demonstration in a 5 km remote strain sensing system, where we have attained sub-picostrain/√Hz resolution in an acoustic signal band from 100 Hz to 100 kHz, with better than 300 femtostrain/√Hz sensitivity above 300 Hz. This is unprecedented in sensitivity and broadband performance, unparalleled over such a long interrogation distance. Strain signals are extracted interferometrically from the differential phase between the carrier and its RF sidebands. This elegant architecture is immune to intensity noise in the laser, as well as ambient acoustic and mechanical perturbations in the remote delivery fiber. The excellent frequency discrimination by the FFP also facilitates a superior signal-to-noise ratio, to effectively overcome the random phase noise due to Rayleigh backscatter in the long length of fiber. Furthermore, the interrogation length can be well beyond the coherence length of the laser source. We show that this performance is limited only by the frequency noise of the diode laser source, as all systemic noise sources in the delivery fiber are effectively transparent to the sensing architecture. This remote sensitivity is a seminal demonstration for a range of applications, such as sea floor acoustic sensing arrays, deep sea hydrophone arrays, and remote surveillance. We will discuss upscaling of this single element experiment to multi-element sensing arrays.

Citation Download Citation

Jong H. Chow, Ian C. M. Littler, David E. McClelland, and Malcolm B. Gray "Long distance high performance remote strain sensing with a fiber Fabry-Perot by radio-frequency laser modulation", Proc. SPIE 6201, Sensors, and Command, Control, Communications, and Intelligence (C3I) Technologies for Homeland Security and Homeland Defense V, 620121 (10 May 2006); https://doi.org/10.1117/12.664282

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available