5 May 2006 Unamplified direct detection sensor for passive millimeter wave imaging
Author Affiliations +
Abstract
We have demonstrated a high efficiency package for zero bias Sb-based backward tunnel diodes developed for passive millimeter wave imaging. Flip-chip mounting of detector MMICs onto quartz substrates permit placement of the detector directly within the WR-10 waveguide feeds for diagonal horn antennas. This arrangement minimizes the losses between the detectors and antennas while providing an impedance match over a majority of W band. A 2x2 array of radiometers was fabricated, assembled, and measured using coherent measurement techniques. The resulting noise equivalent temperature difference, calculated assuming a 30 Hz frame rate is 10 degrees K.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jonathan Lynch, Jonathan Lynch, Harris Moyer, Harris Moyer, Joel Schulman, Joel Schulman, Phillip Lawyer, Phillip Lawyer, Ross Bowen, Ross Bowen, James Schaffner, James Schaffner, Debabani Choudhury, Debabani Choudhury, Jim Foschaar, Jim Foschaar, David Chow, David Chow, } "Unamplified direct detection sensor for passive millimeter wave imaging", Proc. SPIE 6211, Passive Millimeter-Wave Imaging Technology IX, 62110I (5 May 2006); doi: 10.1117/12.667045; https://doi.org/10.1117/12.667045
PROCEEDINGS
7 PAGES


SHARE
Back to Top