18 May 2006 Segmented MEMS deformable-mirror technology for space applications
Author Affiliations +
Abstract
This paper presents MEMS deformable-mirror technology under development at Iris AO. The hybrid approach uses surface-micromachining techniques to fabricate actuator arrays. High-fill-factor mirror arrays are flip-chip bonded on top of these actuator arrays. The single-crystal-silicon mirror segments provide robust substrates for optical coating with excellent surface quality (6-20 nm rms surface-figure errors). The hexagonally close-packed segments are 350 μm on a side, and can thus provide high-spatial frequency corrections in a small form factor. High-stroke actuation of greater than >7.5 μm has been experimentally verified while keeping actuation voltages within reasonable bounds (<130 V). Three electrodes under each actuator allow for piston/tip/tilt motion. An open-loop controller has been demonstrated to position a 37-segment array resulting in a flattened array with only 19 nm rms of surface figure error.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael A. Helmbrecht, Michael A. Helmbrecht, Thor Juneau, Thor Juneau, Matthew Hart, Matthew Hart, Nathan Doble, Nathan Doble, } "Segmented MEMS deformable-mirror technology for space applications", Proc. SPIE 6223, Micro (MEMS) and Nanotechnologies for Space Applications, 622305 (18 May 2006); doi: 10.1117/12.666353; https://doi.org/10.1117/12.666353
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT

The Iris AO S163 X, a 489 actuator, 163 piston...
Proceedings of SPIE (August 11 2009)
Scaling of the Iris AO segmented MEMS DM to larger...
Proceedings of SPIE (February 23 2009)
MEMS DM development at Iris AO, Inc.
Proceedings of SPIE (February 14 2011)
Segmented MEMS deformable-mirror for wavefront correction
Proceedings of SPIE (October 17 2006)
Development of high-order segmented MEMS deformable mirrors
Proceedings of SPIE (February 15 2012)

Back to Top