29 June 2006 Development of configurable slit unit for GTC-EMIR
Author Affiliations +
Abstract
The Configurable Slit Unit (CSU) for EMIR shall enable the possibility to generate a multi-slit configuration, a long slit, or an imaging aperture at the entrance focal plane of the GTC-EMIR instrument. The CSU is therefore a cryogenic reconfigurable slit mechanism. It contains 100 sliding bars which can be positioned within the 307x307mm wide aperture of EMIR's instrument field of view. The development of the CSU has been a challenging task for several reasons: the high number of elements to control to configure a single observing pattern; the nominal working temperature of 77 K at which all the functionalities have to be accomplished, the stringent requirements in both accuracy and repeatability for most of the functionalities and the rotating nature of the EMIR instrument. The combination of these requirements urged the need to develop new pioneering concepts for actuation and position measurement. An actuation mechanism has been developed based on a piezo drive concept. A dedicated incremental, endless capacitive measurement system has been developed to measure the position of each separate bar. Both technologies are successfully realized in the demonstration programme that has been launched to prove the feasibility of the CSU concept. Besides actuation and position control of the bars, also thermal behavior of the CSU concept have been evaluated within the demonstration programme.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Teuwen, M. Teuwen, H. Janssen, H. Janssen, R. Geurink, R. Geurink, P. Redondo, P. Redondo, J. J. Díaz-Garcia, J. J. Díaz-Garcia, } "Development of configurable slit unit for GTC-EMIR", Proc. SPIE 6269, Ground-based and Airborne Instrumentation for Astronomy, 62694B (29 June 2006); doi: 10.1117/12.671793; https://doi.org/10.1117/12.671793
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

Continuum damage mechanics in piezoelectric ceramics
Proceedings of SPIE (May 07 1995)
Cryogenic piezoelectric actuators
Proceedings of SPIE (September 17 2009)
A flexible fingertip tactile sensor
Proceedings of SPIE (April 09 2010)
Smart actuators with piezoelectric materials
Proceedings of SPIE (April 25 1996)

Back to Top