6 July 2006 Design and analysis for interferometric measurements of the GMT primary mirror segments
Author Affiliations +
Abstract
The Giant Magellan Telescope (GMT) uses seven 8.4-m diameter segments to create a giant primary mirror, 25 meters across with focal ratio f /0.7. The off-axis segments will be difficult to measure accurately, as they have 14.5 mm departure from the nearest fitting sphere! The test configuration adopted uses a large 3.75-m powered mirror to fold the light path and provide most of the aspheric correction, with a smaller mirror and computer generated hologram (CGH) providing the additional correction. These optics will be aligned to a vibration-insensitive interferometer using a combination of optical references created by the CGH and metrology with a laser tracker. Some key challenges for this system are presented here including, the system alignment, the large fold mirror, and the mechanical structure. Analysis of the optical test shows that it will meet GMT specifications, including the difficult requirement that the separate segments have matching radius of curvature. Additional corroborative testing will be performed to assure that the mirror segments are correctly figured.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. H. Burge, J. H. Burge, L. B. Kot, L. B. Kot, H. M. Martin, H. M. Martin, R. Zehnder, R. Zehnder, C. Zhao, C. Zhao, } "Design and analysis for interferometric measurements of the GMT primary mirror segments", Proc. SPIE 6273, Optomechanical Technologies for Astronomy, 62730M (6 July 2006); doi: 10.1117/12.672484; https://doi.org/10.1117/12.672484
PROCEEDINGS
12 PAGES


SHARE
RELATED CONTENT

A new method on measuring radius of curvature of a...
Proceedings of SPIE (September 01 2014)
The method to reduce the spinal error in the aspheric...
Proceedings of SPIE (September 26 2016)
Alignment and use of the optical test for the 8.4...
Proceedings of SPIE (July 19 2010)
Measurement of large convex aspheres
Proceedings of SPIE (March 20 1997)
Interferometric testing for large optical elements
Proceedings of SPIE (October 05 2000)

Back to Top