6 July 2006 Development of lightweight stiff stable replicated glass mirrors for the Cornell Caltech Atacama Telescope (CCAT)
Author Affiliations +
Proceedings Volume 6273, Optomechanical Technologies for Astronomy; 62730R (2006); doi: 10.1117/12.671935
Event: SPIE Astronomical Telescopes + Instrumentation, 2006, Orlando, Florida , United States
Abstract
The 25 m aperture Cornell Caltech Atacama Telescope (CCAT) will be the first segmented telescope of its size and precision. A new technology was required to be able to economically manufacture the segments for the primary mirror. This technology had to be a low cost, low risk, volume manufacturing process in addition to meeting all of the optical and mechanical requirements. The segments had to be lightweight (10-15 kg/m2), have high specific stiffness and be thermally stable. The segments had to have sufficient robustness for practical transport and use and be compatible with high-reflectivity coatings. ITT has designed a replicated, lightweight glass mirror solution to these manufacturing problems. This technology can be used to fabricate segments for CCAT. It can be used to fabricate segments for visible wavelength segmented telescopes or any other application requiring lightweight optics in large quantities. This technology enables the fabrication of large, lightweight mirror segments in a few weeks to a couple of months, depending on the figure requirements. This paper discusses the design of these mirrors and presents demonstrated results to date, including a 0.5 m diameter, 8 kg/m2 borosilicate mirror blank and 0.2 m diameter replicated borosilicate mirrors.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David N. Strafford, Steven M. DeSmitt, Peter T. Kupinski, Thomas A. Sebring, "Development of lightweight stiff stable replicated glass mirrors for the Cornell Caltech Atacama Telescope (CCAT)", Proc. SPIE 6273, Optomechanical Technologies for Astronomy, 62730R (6 July 2006); doi: 10.1117/12.671935; https://doi.org/10.1117/12.671935
PROCEEDINGS
14 PAGES


SHARE
KEYWORDS
Mirrors

Glasses

Telescopes

Polishing

Borosilicate glass

Manufacturing

Optics manufacturing

RELATED CONTENT

High volume ULE segment production
Proceedings of SPIE (July 22 2016)
Engineering with lightweight mirrors
Proceedings of SPIE (July 01 1990)
Progress toward a third Gemini M2 mirror
Proceedings of SPIE (August 25 2005)

Back to Top