Translator Disclaimer
6 July 2006 Characterising the electrothermal properties of microstrip-coupled TES detectors
Author Affiliations +
Abstract
Microstrip-coupled Transition Edge Sensors (TESs) are important because they can be combined with waveguide-horn technology to produce sensitive bolometric detectors with well-defined, single-mode beam patterns and polarisation characteristics. They also allow superconducting RF filters to be included on the detector chips. Our own design of TES uses a finline taper to transform between waveguide and superconducting Nb microstrip. The microstrip transports the signal to a matched Au-Cu resistor, which is deposited on a thermally isolated SiN membrane. The dissipated RF power causes the resistance of a Mo-Cu TES bilayer to increase, and the resulting reduction in bias current is read out by a SQUID. We have fabricated TES bilayers with critical temperatures of 400 to 600mK, and deduced dark NEPs as low as 3x10-17W/√Hz at 150GHz. In this paper we describe a number of experiments that were carried out in order to investigate the electrothermal behaviour of microstrip-coupled TESs. We show that the electrothermal behaviour of microstrip-coupled TESs can be as good as that of free-space TESs, and therefore that they are suitable for high-performance astronomical applications.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Louisa Dunlop, Dorota M. Glowacka, David J. Goldie, Stafford Withington, and Ghassan Yassin "Characterising the electrothermal properties of microstrip-coupled TES detectors", Proc. SPIE 6275, Millimeter and Submillimeter Detectors and Instrumentation for Astronomy III, 627507 (6 July 2006); https://doi.org/10.1117/12.671052
PROCEEDINGS
12 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

High-Tc superconducting infrared bolometric detector
Proceedings of SPIE (February 28 1991)
Bolometric detector for OH observation
Proceedings of SPIE (December 26 1995)
Nanotube bolometers
Proceedings of SPIE (February 16 2003)

Back to Top