A test setup for the characterization of far-infrared filters under cryogenic conditions

Stephan M. Birkmann; Ulrich Grözinger; Jutta Stegmaier; Oliver Krause; Eckhard Pitz; Dietrich Lemke

doi:10.1117/12.671121

16 June 2006 A test setup for the characterization of far-infrared filters under cryogenic conditions

Stephan M. Birkmann, Ulrich Grözinger, Jutta Stegmaier, Oliver Krause, Eckhard Pitz, Dietrich Lemke

Proceedings Volume 6275, Millimeter and Submillimeter Detectors and Instrumentation for Astronomy III; 62750S (2006) https://doi.org/10.1117/12.671121
Event: SPIE Astronomical Telescopes + Instrumentation, 2006, Orlando, Florida , United States

Abstract

The characterization and calibration of far-infrared (FIR) detectors is a delicate task that requires good knowledge of the incident flux and its spectral composition. In many test setups the FIR flux to the detectors is provided by means of an external or internal black body and a set of cold attenuation, band pass, and blocking filters. For scientific instruments (e.g. PACS aboard ESA's Herschel satellite) band pass and blocking filters are used to achieve the desired spectral throughput either as order sorting filters in spectrometers or for selecting a wavelength range in imaging cameras. In all cases a detailed knowledge of the spectral transmittance of the used filters is mandatory for an accurate calibration of the system. We have build a test platform that allows to measure the transmission of cold (T ~ 4K) filters in the far-infrared. The setup uses a dual grating monochromator with excellent spectral purity and a resolution up to 800, which is operated under a dry nitrogen atmosphere to eliminate water vapor absorption bands. An Si-bolometer is used as detector and is read out by a cryogenic low noise trans-impedance amplifier circuit with common mode rejection and a warm electronics using a lock-in amplifier and a 22 bit analog-to-digital converter. A cryogenic filter slider in the setup allows for differential measurements between filters and the use of cold order sorting filters. We present initial results for FIR cut-on and attenuation filters, demonstrating that our setup is suited to measure transmissions as low as 10^-4 over the covered wavelength range.

Citation Download Citation

Stephan M. Birkmann, Ulrich Grözinger, Jutta Stegmaier, Oliver Krause, Eckhard Pitz, and Dietrich Lemke "A test setup for the characterization of far-infrared filters under cryogenic conditions", Proc. SPIE 6275, Millimeter and Submillimeter Detectors and Instrumentation for Astronomy III, 62750S (16 June 2006); https://doi.org/10.1117/12.671121

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available