13 October 2006 Research of measuring accuracy of laser tracker system
Author Affiliations +
Proceedings Volume 6280, Third International Symposium on Precision Mechanical Measurements; 62800T (2006) https://doi.org/10.1117/12.716187
Event: Third International Symposium on Precision Mechanical Measurements, 2006, Urumqi, China
Abstract
This paper presents the achievement of a China NSFC project. The Laser Tracker System (LTS) is a portable 3D large size measuring system. The measuring conditions such as time and temperature can greatly affect the measuring accuracy of LTS. This paper pays a great attention to study how the time and temperature affect the measuring accuracy of LTS. Coordinate Measuring Machine (CMM) is employed as a high-level measuring instrument to validate LTS. The experiments have been done to find how the time and temperature affect the measuring accuracy of LTS. The experiments show the LTS can work well with the highest measuring accuracy just after three-hour warm-up. However, the LTS becomes unstable and the measuring accuracy decreases after 10 hours. The LTS needs calibration and compensation every 10 hours. The experiments show that the measuring error can be up to 29.6μm when the measuring temperature is 30.5°C even if the measuring error is less than 5.9μm while the temperature is between 20°C and 23.8°C. The research provides a very useful guidance for application of LTS.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jianfei Ouyang, Jianfei Ouyang, Zhiyong Liang, Zhiyong Liang, Haixin Zhang, Haixin Zhang, Yonggang Yan, Yonggang Yan, } "Research of measuring accuracy of laser tracker system", Proc. SPIE 6280, Third International Symposium on Precision Mechanical Measurements, 62800T (13 October 2006); doi: 10.1117/12.716187; https://doi.org/10.1117/12.716187
PROCEEDINGS
6 PAGES


SHARE
Back to Top