Translator Disclaimer
13 October 2006 Intermittent process measurement and process capability analysis using MP700 touch trigger probe on a CNC machining center
Author Affiliations +
Proceedings Volume 6280, Third International Symposium on Precision Mechanical Measurements; 62801P (2006) https://doi.org/10.1117/12.716147
Event: Third International Symposium on Precision Mechanical Measurements, 2006, Urumqi, China
Abstract
This study developed an intermittent process measurement system by integrating a MP700 touch trigger probe system with a machining center to measure a workpiece containing freeform surface and regular geometric features, and to do the statistical process control analysis. The whole measuring system, consisting of a personal computer, a CNC machining center controller, a RENISHAW MP700 touch probe system, was integrated information-technically. Measuring software was also developed to simulate the measuring path, to prevent collision, to generate the corresponding measuring NC codes and to calculate the process capability indices, such as the process capability index (Cp), the process performance index (CPK) and the accuracy capability index (Ca). To evaluate the performance of the developed measuring system, a carrier combined with a freeform surface and regular geometric features, referred to in the ISO 10791-7 cutting test standard, was designed. Six pieces of the tested carriers were manufactured and inspected using the MP700 touch trigger probe to evaluate the performance of the developed measuring system. According to the measuring results, the developed measuring system was successfully and effectively used to carry out the intermittent process measurement and the statistical process analysis of the measuring results of some test carriers on the machining center.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Fang-Jung Shiou and Po-Chuan Su "Intermittent process measurement and process capability analysis using MP700 touch trigger probe on a CNC machining center", Proc. SPIE 6280, Third International Symposium on Precision Mechanical Measurements, 62801P (13 October 2006); https://doi.org/10.1117/12.716147
PROCEEDINGS
6 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT


Back to Top