7 September 2006 Data rate management and real time operation: recursive adaptive frame integration of limited data
Author Affiliations +
Proceedings Volume 6294, Infrared and Photoelectronic Imagers and Detector Devices II; 62940B (2006); doi: 10.1117/12.674495
Event: SPIE Optics + Photonics, 2006, San Diego, California, United States
Abstract
Recursive Limited Frame Integration was proposed as a way to improve frame integration performance and mitigate issues related to high data rate needed to support conventional frame integration. The technique uses two thresholds -one tuned for optimum probability of detection, the other to manage required false alarm rate, and places integration process between those thresholds. This configuration allows a non-linear integration process that, along with Signal-to-Noise Ratio (SNR) gain, provides system designers more capability where cost, weight, or power considerations limit system data rate, processing, or memory capability. However, Recursive Frame Integration Limited may have performance issues when single-frame SNR is really low. Recursive Adaptive Limited Frame Integration was proposed as a means to improve limited integration performance with really low single-frame SNR. It combines the benefits of nonlinear recursive limited frame integration and adaptive thresholds with a kind of conventional frame integration. Adding the third threshold may help in managing real time operations. In the paper the Recursive Frame Integration is presented in form of multiple parallel recursive integration. Such an approach can help not only in data rate management but in mitigation of low single frame SNR issue for Recursive Integration as well as in real time operations with frame integration.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael K. Rafailov, "Data rate management and real time operation: recursive adaptive frame integration of limited data", Proc. SPIE 6294, Infrared and Photoelectronic Imagers and Detector Devices II, 62940B (7 September 2006); doi: 10.1117/12.674495; https://doi.org/10.1117/12.674495
PROCEEDINGS
10 PAGES


SHARE
KEYWORDS
Signal to noise ratio

Interference (communication)

Signal processing

Data integration

Target detection

Sensors

Signal detection

RELATED CONTENT

Minimum resolvable power contrast model
Proceedings of SPIE (January 12 2018)
Recursive adaptive frame integration limited
Proceedings of SPIE (May 15 2006)
Recursive frame integration of limited data: RAFAIL
Proceedings of SPIE (September 07 2005)
Low-Loss Constant-False-Alarm Rate Processors
Proceedings of SPIE (August 20 1979)

Back to Top