7 September 2006 Bias selective operation of Sb-based two-color photodetectors
Author Affiliations +
Abstract
Multicolor detectors have a strong potential to replace conventional single-color detectors in application dealing with the simultaneous detection of more than one wavelength. This will lead to the reduction of heavy and complex optical components now required for spectral discrimination for multi-wavelengths applications. This multicolor technology is simpler, lighter, compact and cheaper with respect to the single-color ones. In this paper, Sb-based two-color detectors fabrication and characterization are presented. The color separation is achieved by fabricating dual band pn junction on a GaSb substrate. The first band consists of an InGaAsSb pn junction for long wavelength detection, while the second band consists of a GaSb pn junction for shorter wavelength detection. Three metal contacts were deposited to access the individual junctions. Surface morphology of multi-layer thin films and also device characteristics of quasi-dual band photodetector were characterized using standard optical microscope and electro-optic techniques respectively. Dark current measurements illustrated the diode behavior of both lattice-matched detector bands. Spectral response measurements indicated either independent operation of both detectors simultaneously, or selective operation of one detector, by the polarity of the bias voltage, while serially accessing both devices.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. N. Abedin, M. N. Abedin, T. F. Refaat, T. F. Refaat, I. B. Bhat, I. B. Bhat, Y. Xiao, Y. Xiao, D. G. Johnson, D. G. Johnson, } "Bias selective operation of Sb-based two-color photodetectors", Proc. SPIE 6297, Infrared Spaceborne Remote Sensing XIV, 629709 (7 September 2006); doi: 10.1117/12.680969; https://doi.org/10.1117/12.680969
PROCEEDINGS
9 PAGES


SHARE
Back to Top