Integrated optical sensor using a dispersion guided photonic crystal structure

Richard Martin; Ahmed Sharkawy; John Humphrey; Eric J. Kelmelis; Dennis W. Prather

doi:10.1117/12.681136

22 September 2006 Integrated optical chemical sensor using a dispersion-guided photonic crystal structure

Richard Martin, Ahmed Sharkawy, John Humphrey, Eric J. Kelmelis, Dennis W. Prather

Proceedings Volume 6322, Tuning the Optic Response of Photonic Bandgap Structures III; 63220I (2006) https://doi.org/10.1117/12.681136
Event: SPIE Optics + Photonics, 2006, San Diego, California, United States

Abstract

There is a growing need for miniature low-cost chemical sensors for use in monitoring environmental conditions. Applications range from environmental pollution monitoring, industrial process control and homeland security threat detection to biomedical diagnostics. Integrated opto-chemical sensors can provide the required functionality by monitoring chemistry induced changes in the refractive, absorptive, or luminescent properties of materials. Mach-Zehnder (MZ) interferometers, using the phase induced from a chemically reactive film, have shown success for such applications but typically are limited to one chemical analysis per sensor. In this paper we present a MZ-like sensor using the dispersion properties of a photonic crystal lattice. Properly engineered dispersion guiding enables the creation of multiple parallel MZ-like sensors monitoring different chemical reactions in a device much smaller than a typical MZ sensor. The phase shift induced in one arm of the photonic crystal structure by the chemical reaction of a special film induces a change in the sensor output. The use of a dispersion guiding photonic crystal structure enables the use of lower refractive index materials because the creation of a bandgap is not necessary. This in turn increases coupling efficiency into the device. Other advantages of this type of structure include the ability to guide both TE and TM modes as well as reduced sensitivity to fabrication tolerances. Two-dimensional FDTD analysis is used to optimize and model the effectiveness of the structure.

Citation Download Citation

Richard Martin, Ahmed Sharkawy, John Humphrey, Eric J. Kelmelis, and Dennis W. Prather "Integrated optical chemical sensor using a dispersion-guided photonic crystal structure", Proc. SPIE 6322, Tuning the Optic Response of Photonic Bandgap Structures III, 63220I (22 September 2006); https://doi.org/10.1117/12.681136

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available