30 August 2006 A gap sensing technique based on surface plasmon resonance
Author Affiliations +
Abstract
A nanometer-scale gap sensing technique based on surface plasmon resonance principle is presented. A simulation to the gap sensing technique and an experimental setup to verify the simulation results have both done in this study. For simulation, Fresnel's equation was used to derive the multilayer reflectivity of KR configuration of SPR devices. The results show that the resonance angle increased when the air gap, which was within half a wavelength, between the SPR device and the glass slide was decreased. For experiment, we measured the reflectivity versus incident angle. The results verify the theoretical prediction. Utilizing this novel surface plasmon resonance gap sensing technique, we have measured an air gap down to 100 nm. The technique is better than the other methods used in nanometer-scale gap measurements.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pao Tung Wu, Pao Tung Wu, Meng Chyi Wu, Meng Chyi Wu, Chien Ming Wu, Chien Ming Wu, } "A gap sensing technique based on surface plasmon resonance", Proc. SPIE 6324, Plasmonics: Nanoimaging, Nanofabrication, and their Applications II, 632415 (30 August 2006); doi: 10.1117/12.679054; https://doi.org/10.1117/12.679054
PROCEEDINGS
9 PAGES


SHARE
Back to Top