12 September 2006 Luminance requirements for lighted signage
Author Affiliations +
Light-emitting diode (LED) technology is presently targeted to displace traditional light sources in backlighted signage. The literature shows that brightness and contrast are perhaps the two most important elements of a sign that determine its attention-getting capabilities and its legibility. Presently, there are no luminance standards for signage, and the practice of developing brighter signs to compete with signs in adjacent businesses is becoming more commonplace. Sign luminances in such cases may far exceed what people usually need for identifying and reading a sign. Furthermore, the practice of higher sign luminance than needed has many negative consequences, including higher energy use and light pollution. To move toward development of a recommendation for lighted signage, several laboratory human factors evaluations were conducted. A scale model of a storefront was used to present human subjects with a typical red channel-letter sign at luminances ranging from 8 cd/m2 to 1512 cd/m2 under four background luminances typical of nighttime outdoor and daytime inside-mall conditions (1, 100, 300, 1000 cd/m2), from three scaled viewing distances (30, 60, 340 ft), and either in isolation or adjacent to two similar signs. Subjects rated the brightness, acceptability, and ease of reading of the test sign for each combination of sign and background luminances and scaled viewing distances.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jean Paul Freyssinier, Jean Paul Freyssinier, Nadarajah Narendran, Nadarajah Narendran, John D. Bullough, John D. Bullough, } "Luminance requirements for lighted signage", Proc. SPIE 6337, Sixth International Conference on Solid State Lighting, 63371M (12 September 2006); doi: 10.1117/12.681422; https://doi.org/10.1117/12.681422


Design a LED coupler to collocate with a light guide...
Proceedings of SPIE (September 24 2014)
Color rendering properties of LED light sources
Proceedings of SPIE (November 25 2002)
An overview of LED applications for general illumination
Proceedings of SPIE (November 11 2003)
A study of power saving LED back light module
Proceedings of SPIE (November 15 2010)
Embed a linear irregular Fresnel lens into a simple empty...
Proceedings of SPIE (November 26 2012)

Back to Top