10 June 2006 Solution concentration sensor based on a long-period fiber grating
Author Affiliations +
Proceedings Volume 6344, Advanced Laser Technologies 2005; 63440M (2006) https://doi.org/10.1117/12.693436
Event: Advanced Laser Technologies 2005, 2005, Tianjin, China
Abstract
We report a new fiber-optical solution concentration sensor based on an etched long-period fiber grating with one opening head coated with a silver film, which is written symmetrically by three beams of focused high-frequency CO2 laser pulses in a standard single-mode fiber (Corning SMF-28). This sensor is tested with two kinds of solution, i.e. sugar and CaCl2, and the experimental results show that this etched fiber-optical sensor with one opening head is flexible to operate and has very high resolution. The resolution of this sensor increases with approximate linearity, as the concentration of solution increases, and the resolutions for sugar solution at low and high concentrations are 1.65 (g/l) and 1.36 (g/l), respectively. Its average resolution has been improved above 28% after the cladding radius of this sensor is reduced to 61μm by etching with HF acid. The method of etching with HF acid can also be used to tune the resonant wavelengths of a long-period fiber grating.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shouhua Guan, Shouhua Guan, Qingxu Yu, Qingxu Yu, Shide Song, Shide Song, Xiaodong Liu, Xiaodong Liu, Zhaoyuan Song, Zhaoyuan Song, } "Solution concentration sensor based on a long-period fiber grating", Proc. SPIE 6344, Advanced Laser Technologies 2005, 63440M (10 June 2006); doi: 10.1117/12.693436; https://doi.org/10.1117/12.693436
PROCEEDINGS
7 PAGES


SHARE
Back to Top