Paper
10 June 2006 Study of carbon plasma for non-vacuum laser deposition
T. V. Kononenko, V. I. Konov
Author Affiliations +
Proceedings Volume 6344, Advanced Laser Technologies 2005; 634418 (2006) https://doi.org/10.1117/12.694290
Event: Advanced Laser Technologies 2005, 2005, Tianjin, China
Abstract
A new laser plasma technique for non-vacuum deposition of thin films has been developed recently. This technique was successfully applied to deposit hard carbon coatings on steel substrates. The obtained diamond-like carbon (DLC) coatings with amorphous structure demonstrated high nanohardness and good adhesion to the substrate. Here we present new experimental data concerning parameters of the produced carbon plasma and features of the plasma-substrate interaction, which are necessary for further progress of this technique. Spectroscopic study of the plasma emission was performed for picosecond and nanosecond laser pulses at different wavelengths (λ=1078 nm, 539 nm and 248 nm). The laser plasma composition was studied and conditions for the occurrence of low-threshold air breakdown near the target surface were determined. The ranges of the substrate-target distances, which ensure carbon film deposition or plasma etching of the substrate, were determined. The revealed influence of the laser pulse energy, pulse duration and wavelength on the plasma-substrate interaction is reported.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
T. V. Kononenko and V. I. Konov "Study of carbon plasma for non-vacuum laser deposition", Proc. SPIE 6344, Advanced Laser Technologies 2005, 634418 (10 June 2006); https://doi.org/10.1117/12.694290
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Plasma

Carbon

Picosecond phenomena

Laser ablation

Spectroscopy

Pulsed laser operation

Visible radiation

Back to Top