21 June 2006 Angular vibration measurement using grating and laser interferometer
Author Affiliations +
Proceedings Volume 6345, Seventh International Conference on Vibration Measurements by Laser Techniques: Advances and Applications; 63451L (2006) https://doi.org/10.1117/12.693094
Event: Seventh International Conference on Vibration Measurements by Laser Techniques: Advances and Applications, 2006, Ancona, Italy
Abstract
Primary angular acceleration calibration standard is developed by CIMM to generate standard rotational angle, angular velocity and angular acceleration, which are traceable to the International System of Units (SI). It can be used to calibrate angular transducers, i.e. angular accelerometer, angular velocity transducer, and rotational angle transducer to obtain amplitude sensitivity and phase shift by sinusoidal vibration. The measurement systems based on grating and laser interferometers are introduced in this paper. The measurement system based on PXI bus instrument is used to control the angular exciter, measure the output signal of the laser interferometers and the transducer to be calibrated synchronously. The methods for calculating the amplitude and phase of sinusoidal angular movement are investigated and high performance has been achieved. It shows the standard can be used in angular movement calibration in the frequency range from 0.1Hz to 200Hz.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Li Zhang, Jun Peng, "Angular vibration measurement using grating and laser interferometer", Proc. SPIE 6345, Seventh International Conference on Vibration Measurements by Laser Techniques: Advances and Applications, 63451L (21 June 2006); doi: 10.1117/12.693094; https://doi.org/10.1117/12.693094
PROCEEDINGS
7 PAGES


SHARE
Back to Top