Translator Disclaimer
26 April 2007 Influence of the processing parameters on the ultrashort laser ablation of metals
Author Affiliations +
Proceedings Volume 6346, XVI International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers; 63462Y (2007) https://doi.org/10.1117/12.739127
Event: XVI International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, 2006, Gmunden, Austria
Abstract
Laser ablation of Al, Ni, Fe, and Cu was investigated for pulse durations of 0.1, 1 and 5 ps at fluences up to 100 J.cm-2. The ablation depth per pulse was measured and the ablation thresholds were estimated. The increase of the pulse duration results in a decrease of the ablation rate. The presence of a molten phase is clearly expressed at fluences above 10 J.cm-2. Molecular Dynamics simulation was used to model the laser ablation process in the case of Fe, Al and Ni.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Petar A. Atanasov and Nikolay N. Nedialkov "Influence of the processing parameters on the ultrashort laser ablation of metals", Proc. SPIE 6346, XVI International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, 63462Y (26 April 2007); https://doi.org/10.1117/12.739127
PROCEEDINGS
6 PAGES


SHARE
Advertisement
Advertisement
Back to Top