8 May 2007 Void creating inside a transparent resin material using nano-pulse Nd: YAG laser
Author Affiliations +
Proceedings Volume 6346, XVI International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers; 63463T (2007) https://doi.org/10.1117/12.739420
Event: XVI International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, 2006, Gmunden, Austria
Abstract
In our laboratory, new three-dimensional memory using interference pattern caused by void array has been proposed. In this method, Interference pattern is obtained by irradiating visible laser to void arrays as a slit. Information has been written in transparent materials with void array and read out with interference pattern analysis and the void array restoration. The void creating from 4&mgr;m to 10&mgr;m has been successful using nano-pulse Nd: YAG laser. These created voids are fulfilled conditions of forming an interference pattern. It is suggested that reading out of information has been available using interference pattern. Probability of the void creating is too low and a crack might be generated on the past investigation. In this study, the parameter of irradiation energy and number of irradiation has been explored for the void creating with high probability.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shinichi Yamamoto, Shinichi Yamamoto, Shinsuke Takeuchi, Shinsuke Takeuchi, Daisaku Tokita, Daisaku Tokita, Yoshio Ishii, Yoshio Ishii, Yuzuru Kubota, Yuzuru Kubota, Kazuhiro Watanabe, Kazuhiro Watanabe, } "Void creating inside a transparent resin material using nano-pulse Nd: YAG laser", Proc. SPIE 6346, XVI International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, 63463T (8 May 2007); doi: 10.1117/12.739420; https://doi.org/10.1117/12.739420
PROCEEDINGS
6 PAGES


SHARE
Back to Top