3 October 2006 Fabrication and characterization of two-dimensional optical low pass filter
Author Affiliations +
Proceedings Volume 6351, Passive Components and Fiber-based Devices III; 63510W (2006) https://doi.org/10.1117/12.687339
Event: Asia-Pacific Optical Communications, 2006, Gwangju, South Korea
Abstract
Two-dimensional optical low pass filter (OLPF) was designed, fabricated and tested in our lab. The modulation transfer function (MTF) of OLPF shows that cut-off frequency is 96.15lp/mm in x and y direction, which is satisfied with our design. The transmissions in the visible and infrared regions of the spectrum are mostly above 95% and less than 2%, respectively. The error of every plate thickness is tested less than 0.34% by the experiment of pulse response. The spatial frequency test results show that our device has good low filter performance, matches with the solid state image sensor and well restrains the moire effect and false colors distortion.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xunjun Qi, Xunjun Qi, Bin Lin, Bin Lin, Ju Liang, Ju Liang, Bo Chen, Bo Chen, Xiangqun Cao, Xiangqun Cao, } "Fabrication and characterization of two-dimensional optical low pass filter", Proc. SPIE 6351, Passive Components and Fiber-based Devices III, 63510W (3 October 2006); doi: 10.1117/12.687339; https://doi.org/10.1117/12.687339
PROCEEDINGS
9 PAGES


SHARE
Back to Top