Translator Disclaimer
28 September 2006 Thermal effects of moisture inducing delamination in light-emitting diode packages
Author Affiliations +
Proceedings Volume 6355, Advanced LEDs for Solid State Lighting; 635516 (2006) https://doi.org/10.1117/12.691555
Event: Asia-Pacific Optical Communications, 2006, Gwangju, South Korea
Abstract
This work reports on the moisture inducing delamination in light-emitting diode (LED) packages and its effects on thermal characteristics. The LED samples were subjected to moisture preconditioning followed by heat block testing. Transient thermal measurements were performed to investigate the thermal behavior of the delaminated LEDs. Increase of thermal resistance with the degree of delamination was observed from the transient measurement. The thermo-mechanical calculated from coupled-field FEA simulation agree well with the micrographical evidence. The calculated hygro-mechanical stress increased with the preconditioning time. It was found that the thermo-mechanical stress plays more important role than the hygro-mechanical stress for the development of delamination in the LED packages. Moisture preconditioning for 3 hrs and 6 hrs under 85°C/85RH conditions was found to make little contribution to the delamination between the chip and lead frame.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jianzheng Hu, Lianqiao Yang, and Moo Whan Shin "Thermal effects of moisture inducing delamination in light-emitting diode packages", Proc. SPIE 6355, Advanced LEDs for Solid State Lighting, 635516 (28 September 2006); https://doi.org/10.1117/12.691555
PROCEEDINGS
9 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

The heat dissipation performance of LED applied a MHP
Proceedings of SPIE (September 14 2005)
White LED performance
Proceedings of SPIE (October 20 2004)
The Effect of Boundary Thermal Resistance on HD DVD ARW...
Proceedings of SPIE (September 09 2004)
Thermal design of high-power LED package and system
Proceedings of SPIE (September 21 2006)
Estimating junction temperature of high-flux white LEDs
Proceedings of SPIE (June 21 2004)

Back to Top