6 November 2006 Design of three-phase power network multi-function measurement instrument based on AT73C500
Author Affiliations +
Three-phase power network multi-function measurement instrument was designed to measure current, voltage, frequency, power factor, active/reactive, apparent power, and etc. which adopted ATMEL DSP-based power metering chipset AT73C500 and AT73C501. The design method based on ATMEL microchip AVR8515 was introduced, and the causes of measurement errors and calibration methods were discussed. The test results show that the accuracy of the measuring instrument is of class 0.5.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiaoqin Lian, Xiaoqin Lian, Yelan Wu, Yelan Wu, Qun Hao, Qun Hao, } "Design of three-phase power network multi-function measurement instrument based on AT73C500", Proc. SPIE 6357, Sixth International Symposium on Instrumentation and Control Technology: Signal Analysis, Measurement Theory, Photo-Electronic Technology, and Artificial Intelligence, 63573H (6 November 2006); doi: 10.1117/12.717231; https://doi.org/10.1117/12.717231


Hybrid ADC based on flash and delay-line structures
Proceedings of SPIE (March 13 2013)
An FPGA-based reconfigurable DDC algorithm
Proceedings of SPIE (September 28 2016)
A simple all-digital PET system
Proceedings of SPIE (March 15 2007)
Low-level RF control development for the European X-FEL
Proceedings of SPIE (October 11 2005)
Multiprocessor platform for signal processing
Proceedings of SPIE (July 17 1998)
10-GOPS transversal filter and error table compensator
Proceedings of SPIE (November 02 1999)

Back to Top