6 November 2006 Design for spectrum-dividing system in multispectral guidance optical system
Author Affiliations +
Multi-spectral Guidance is most important in the development of modern Optical Guidance System. This paper advances a scheme of spectrum-dividing system used in the multi-spectral guidance optical system. The scheme introduces prismatic technology into the design of optical system of the Guidance System. Combining characters of optical thin-films and prisms and optimizing filmy parameters by Simulated annealing algorithm so that it can divide the multi-spectrum into available spectrums completely. Consequently, a miniature, lightweight spectrum-dividing construction, suitable for different wavelengths, has achieved. It satisfies the requirements of a multi-spectral optical guidance system. And the spectrum-dividing system designed in this paper can divide a wide spectrum ranged from 0.4 to 5.0μm into three spectra, which are visible, short-infrared and medium-wave infrared separately. Compared with the traditional guidance system, it can improve the detecting capability effectively.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chunyan Shen, Chunyan Shen, Yuesong Jiang, Yuesong Jiang, Xiaofang Wu, Xiaofang Wu, } "Design for spectrum-dividing system in multispectral guidance optical system", Proc. SPIE 6357, Sixth International Symposium on Instrumentation and Control Technology: Signal Analysis, Measurement Theory, Photo-Electronic Technology, and Artificial Intelligence, 63574E (6 November 2006); doi: 10.1117/12.717314; https://doi.org/10.1117/12.717314


Achromatic wave plates for the mid-infrared
Proceedings of SPIE (June 08 2012)
Window coating prospects of Cu2Se thin films
Proceedings of SPIE (February 01 1992)
Design of antireflection coatings at big incident angle
Proceedings of SPIE (October 26 1994)

Back to Top