Paper
12 October 2006 Embedded 3D vision system for automated micro-assembly
Author Affiliations +
Proceedings Volume 6382, Two- and Three-Dimensional Methods for Inspection and Metrology IV; 63820J (2006) https://doi.org/10.1117/12.686675
Event: Optics East 2006, 2006, Boston, Massachusetts, United States
Abstract
Machine vision plays an important role in automated assembly. However, present vision systems are not adequate for robot control in an assembly environment where individual components have sizes in the range of 1 to 100 micrometers, since current systems do not provide sufficient resolution in the whole workspace when they are fixed, and they are too bulky to be brought close enough to the components. A small-size 3D vision system is expected to provide two decisive advantages: high accuracy and high flexibility. The presented work aims to develop a 3D vision sensor easily embedded in a micro-assembly robot. The paper starts by a screening of 3D sensing methods, performed in order to identify the best candidates for miniaturization, and that results in the selection of the multifocus principle (which elegantly avoids the depth of field problem encountered for example in stereo vision). Here, depth is measured by determination of sharpness maxima in a stack of images acquired at different elevations. Then, it presents a preliminary system configuration, that delivers images of a 1300×1000 micrometers field of view with lateral resolution better than 5 micrometers and vertical resolution better than 20 micrometers. Finally, future steps in development of a real-time embedded multifocus sensor are presented, with a discussion of the most critical tradeoffs.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
James Mure-Dubois and Heinz Hügli "Embedded 3D vision system for automated micro-assembly", Proc. SPIE 6382, Two- and Three-Dimensional Methods for Inspection and Metrology IV, 63820J (12 October 2006); https://doi.org/10.1117/12.686675
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

3D vision

Imaging systems

3D metrology

Microscopes

Miniature imaging systems

Embedded systems

Back to Top